Professional quality external
desktop TV tuner box and
video to VGA converter!

Guaranteed to work with all
PAL SECAM and NTSC TVs
through VGA connection!

The TTB1205 is a Multisystem Tuner that can receive worldwide terrestrial broadcasting and CATV channels. It will then convert the input into 720x480 VGA or HDTV 480P/576P output for display on LCD monitor, plasma, or projection TV.

The unit accepts both and RF and AV signals and outputs a high definition signal to your PC monitor or LCD projector or Plasma TV.

Use Your American TV Around The World!

STANDARDS SUPPORTED	WHERE TO USE?
PAL-I, PAL-D/K, PAL-B/G, SECAM-D/K, SECAM-B/G	FAR EAST, EUROPE, MIDDLE EAST, AFRICA, AUSTRALIA
NTSC-M	USA, CANADA, MEXICO, JAPAN, TAIWAN (For more countries see the bottom table)

Main Features:

• View Worldwide VHF/UHF/Cable TV, DVD movie and other videos on your TV, PC monitor, LCD projector or large screen HDTV or Plasma TV.
• Systems Supported:
  • NTSC-M/N
  • PAL-I, PAL-D/K, PAL-B/G
  • SECAM-D/K, SECAM-B/G
• Accepts Worldwide RF, S-Video, Composite video and VGA inputs.
• Equipped with both TV and PC output allows for simultaneously viewing aerial channel on both TV and PC monitor.
• Multisystem Tuner receives worldwide terrestrial broadcasting and CATV channels.
• Converts above inputs to 720x480 VGA or HDTV 480P/576P output for display on LCD monitor, plasma, or projection TV (via HD-15, 15 pin connector).
• 50 to 60 Hz frame rate conversion ensures smooth display for PAL input (50 Hz).
• Auto-scan programming and full channels memory.
• Built-in adaptive film mode 3:2 pull-down provides clear and crisp de-interlacing of video originating from 24 fps film, such as DVD movies.
• Supports 2:2 pull down for PAL mode video.
• Vertical Temporal Filter removes jaggy and other de-interlacing artifacts from normal video.
• Y,Pb, Pr output for progressive scanning display (via HD-15, 15 pin connector).
• Motion-adaptive interfiled de-interlacing.
• OSD menu display for channel tuning and picture adjustment.
• PC loop through allows for easy switch between video and PC input.
• No software driver required. It suits all OS.
• MTS stereo audio output.

Specifications:

• TV/Cable RF input: F connector 75 Ohm
• Video input:1 V p-p 75 Ohm phone-jack
• S-video input: Y: 1 Vp-p, 75 Ohm; C0.286 Vp-p 75 Ohm
• VGA input: RGB input 0.7 Vp-p typ
• VGA/Component output: RGB output 0.7 Vp-p typ
• TV output: 1 Vp-p 75 Ohm RCA jack
• Audio input: 1 x L,R Audio RCA jack and 1x L,R Audio phone jack (3.5mm) 350 Vrms
• Audio output: 1 x L,R Audio RCA jack 350 Vrms
• Power: DC 12V 800mA

Easy to install! In two minutes of simple installation of the 1205 TV Tuner Box, your TV monitor or projector is fully set to receive your local broadcast or cable system video signal. See the connections diagram here!

NTSC TVs must have HD-15 VGA input connector. Read More...

	Progressive Scan HDTV Display: Now you can connect the TTB-1205 to your TV/Display Monitor through Component connection to enable Progressive Scan HDTV quality viewing. For your convenience we throw in a VGA to Component Cable adapter!
User Manual (.pdf)

TV & Monitor Requirements

What's In The Box? (Click here to see)